Mobile phone model: iPhone SE
iOS version: 13.2
Post-upgrade problem: hotspot connection is normal, but can't connect to the Internet
Actual solution date: 2019/10/31
Solution:
(1) Take the author's mobile phone as an example, iPhone SE is hotspot (AP-iSE), internal IP address 172.20.10.1
(2) Take the Android mobile phone as an example. To connect to the hotspot AP-iSE, in addition to inputting [hot password], add the [Advanced option], set the [DHCP] change to [Manual], and set the IP address. For 172.20.10.x (x can be set to 3 ~ 14 one of the numbers)
(3) After the setting is completed, close [WiFi], turn on [WiFi], select [hot spot], and then click [Connect]
(4) You're done, the hotspot connection is normal, and the connection is normal.
2019年11月1日 星期五
2019年10月31日 星期四
[iOS] iOS 13.2 升級異常:熱點分享無法連線上網的解決方法
手機機型:iPhone SE
iOS 版本:13.2
升級後問題:熱點連線正常,但是無法連線上網
實測解決日期:2019/10/31
解決方法:
(1) 以筆者手機為例,iPhone SE 為熱點 (AP-iSE),內部 IP 位址 172.20.10.1
(2) 以 Android 手機為例,欲連結熱點 AP-iSE 時,除了輸入【熱點密碼】外,再增加設定【進階選項】,將【DHCP】變更設定為【手動】,將 IP 位址設定為 172.20.10.x (x 可以設定為 3 ~ 14 其中一個數字)
(3) 設定完成後,關閉【WiFi】,開啟【WiFi】,選擇【熱點】,再點選【連線】
(4) 大功告成, 熱點連線正常,連線上網正常。
iOS 版本:13.2
升級後問題:熱點連線正常,但是無法連線上網
實測解決日期:2019/10/31
解決方法:
(1) 以筆者手機為例,iPhone SE 為熱點 (AP-iSE),內部 IP 位址 172.20.10.1
(2) 以 Android 手機為例,欲連結熱點 AP-iSE 時,除了輸入【熱點密碼】外,再增加設定【進階選項】,將【DHCP】變更設定為【手動】,將 IP 位址設定為 172.20.10.x (x 可以設定為 3 ~ 14 其中一個數字)
(3) 設定完成後,關閉【WiFi】,開啟【WiFi】,選擇【熱點】,再點選【連線】
(4) 大功告成, 熱點連線正常,連線上網正常。
訂閱:
文章 (Atom)